| Model |
BlackoutBuster 1400 BB148E |
BlackoutBuster 2000 BB20E
|
| Capacity |
1400VA / 840W |
2000VA / 1080W
|
| Input Specifications
|
| Nominal Input Voltage |
230V AC
|
| Input Voltage Range |
170 - 274VAC
|
| Input Frequency Range |
45 - 55Hz
|
| Output Specifications
|
| Nominal Output Voltage |
230VAC |
| Output Voltage Regulation |
± 10% |
| Nominal Output Frequency |
50Hz ± 1Hz (on battery mode) |
| Output Waveform |
Modified Sinewave |
| Battery Specifications |
| Rating |
12V9AH or equivalent |
| Number of Batteries |
2 |
| Backup Time |
Up to 20 minutes* |
| Recharge Time |
8 hours to 90% after complete discharge |
| Transfer Time |
| Typical |
4-6ms |
| Environment Specifications |
| Operating Environment |
0°C to 40°C |
| Relative Humidity |
0-90% without condensation |
| Noise Level |
AC Mode: Less than 40dB, Backup Mode: Less than 45dB |
| System Indicators |
| Protection |
Discharge, Overcharge and Overload Protection |
| AC Mode |
1st green LED illuminates. 2nd to 5th green LEDs gradually illuminates indicating load level |
| Battery Mode |
1st green LED flashing. 2nd to 5th green LEDs gradually illuminates indicating load level |
| Fault |
Red LED illuminates |
| Network Capability |
| Communications |
Intelligent interface-RS232 (DB9). Support Windows 95/98/ME/NT/2000/XP, Linux and most of the Operating Systems (Free download at www.powerkinetics.com) |
| Audible Alarm |
| Battery Mode |
Beeping every 10 seconds |
| Low Battery |
Beeping every 1 second |
| Overload |
Beeping every 0.5 second |
| Fault |
Continuous beeping |
| Physical Specifications |
| Dimensions
(WxHxD)mm |
140.2 x 180.4 x 368.3
|
| Weight (kg) |
14.2 |
16
|
